Board & Batten

Related terms

• Breaker Board

  A divider board run perpendicular mid-deck so decking doesn't need full-length boards or end butt joints across the field.

• Beam Cantilever

  The limited allowable overhang of joists past the beam (and beam past posts). Code caps it as a fraction of the backspan.

• Brick Veneer

  A single non-structural brick wythe over a framed wall with an air gap and ties. Durable and low-maintenance; weep holes and flashing are…

• Baluster / Spindle

  The vertical infill members of a railing. Spacing must reject a 4-inch sphere to meet code.

• Cable Railing

  Horizontal stainless cables as rail infill for a view-through modern look. Cables must be highly tensioned and posts reinforced to keep s…

• Back-Priming / Sealing

  Priming all faces and cut ends of wood/fiber-cement siding and trim before install so moisture can't enter the unsealed back and cause fa…

• Capillary Break

  A gap or coating stopping water from wicking between materials (e.g., between siding and trim or framing and concrete).

• Clapboard / Lap Siding

  Horizontal boards installed overlapping to shed water — the most common siding profile across materials.