Faucet Hole Configuration

Related terms

• Fill Valve / Flapper

  The tank components that refill after a flush (fill valve) and release water to the bowl (flapper). The usual culprits in a running toilet.

• Fan/Light Combo

  A combined exhaust fan and ceiling light (sometimes with heater or Bluetooth). A common space-saving fixture; the fan still must be ducte…

• Fixture Clearance

  The required spacing between and around fixtures (e.g., centerline-to-wall at a toilet, space in front of a vanity). Code minimums exist;…

• Fan CFM Sizing

  Sizing the exhaust fan to the room — a common rule is 1 CFM per square foot, more for large baths or enclosed tub/shower areas. Undersize…

• Floating / Wall-Hung Vanity

  A vanity mounted to the wall with open floor beneath. A contemporary look that eases floor cleaning but requires solid in-wall blocking t…

• Escutcheon

  The decorative trim plate covering the wall or deck penetration around a valve, faucet, or pipe — the visible cap over the rough plumbing.

• Framed / Semi-Frameless Door

  Enclosures with full or partial metal framing around thinner glass. More economical than frameless; the framing collects grime over time.

• Epoxy Grout

  A stain-proof, waterproof grout that resists the discoloration cement grout suffers in wet areas. Costlier and harder to install but the…